The vacuum pressure is determined by the positron current, reaching 6 10-9 mbar
at 50 mA.
The base pressure in South shows good recovery after the leak,
but the pressure in North shows no improvement.
No improvement seen.
The pump NR:HP3.6 (at ABS-1, between GG and GI1, at z=-3.6m) shows some
effect from the cold beam pipe in GG, which was warmed up to about 100K
and then cooled down again to the standard 70K.
Again, no improvement seen after the maintenance day.
The pressure increases by a factor of 40 within 1 minute, leading to chamber and even LAR calorimeter HV trips.
Another one, with aftershocks:
These pressure bumps occur quite frequently during a fill